Eldistribution & Fastighetsautomation
Detta är ett svenskt forum där du kan få svar på dina frågor av experter inom eldistribution, digitalisering & fastighetsautomation. Här kan du också diskutera dina erfarenheter med branschkollegor.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-01-08 01:11 PM
Good evening,
I’m trying for days now, to link my Smart Wallbox, to my OCCP Central.
In my reports, I see:
[OCPP]
ocppVersion= 1.6
ocppCentralAddress= ws://192.168.1.241:8180
ocppBoxLocalPort= 8080
ocppBoxPublicIp=
ocppBoxPublicPort= 8080
ocppBoxLocalSSL= 0
ocppBoxAddressReplyTo= http://www.w3.org/2005/08/addressing/anonymous
ocppModemIpAddress= 192.168.0.254
ocppModemPresence= 0
modemType=
confModemRetryInterval= 30
boxIdentity= UNDEFINED
defaultIdTag= UNDEFINED
isMeterValueSimulated= false
MeterValuesAlignedData= Energy.Active.Import.Register
MeterValuesSampledData= Energy.Active.Import.Register
meterValueSampleInterval= 30
disconnectedMeterValueSampleInterval= 900
clockAlignedDataInterval= 900
ocppConnectTimeOut= 60
WebSocketPingInterval= 60
MinimumStatusDuration= 0
TransactionMessageRetryInterval=60
TransactionMessageAttempts=500
truncateBootNotificationsSerialNumbers= false
clientHttpsOptions= DEFAULT
cacheListEnabled= true
enablePlugNumbering= false
enableDoubleNotification= false
lastAcceptedOcppCentralAddress=wss://ocpp.chargehq.net:443/ocpp16/Laadpaal
lastAcceptedBoxIdentity= Laadpaal
lastAcceptedHeartBeatInterval= 300
compressDiagnostic= 1
ocppEMDegradedModeEnabled= 0
EnergyLimitValue= 0
isEnergyLimitedActive= false
But someone else has:
truncateBootNotificationsSerialNumbers= true
How can I change that value? Because now the serial that is being communicated is too long… And so not following the OCPP1.6 regulations.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-01-10 01:09 AM
It sounds more like a support question. But you could try export the config file, open it in notepad, edit the value, save it and import it again.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-01-10 01:09 AM
It sounds more like a support question. But you could try export the config file, open it in notepad, edit the value, save it and import it again.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-01-10 01:10 AM
Indeed. That was the trick!
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.