Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84564members
353833posts

ports

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

Solved
DCIM_Support
Picard
Picard
0 Likes
2
259

ports

This question was originally posted on DCIM Support by Mark on 2018-04-03


(CID:130090662)


Accepted Solutions
DCIM_Support
Picard
Picard
0 Likes
0
259

Re: ports

This answer was originally posted on DCIM Support by Steven Marchetti on 2018-04-03


Mark,

 

The network ports used in StruxureWare DCE can be found in this k-base:

http://www.apc.com/us/en/faqs/index?page=content&id=FA158328

 

Steve

(CID:130090671)

See Answer In Context

2 Replies 2
DCIM_Support
Picard
Picard
0 Likes
0
260

Re: ports

This answer was originally posted on DCIM Support by Steven Marchetti on 2018-04-03


Mark,

 

The network ports used in StruxureWare DCE can be found in this k-base:

http://www.apc.com/us/en/faqs/index?page=content&id=FA158328

 

Steve

(CID:130090671)

DCIM_Support
Picard
Picard
0 Likes
0
259

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.