Restarting DCE causes device mgt interfaces to lock

[DCIM_Support]

This question was originally posted on DCIM Support by Sean Russell on 2019-09-17

---

DCE 7.7.1 - rebooting DCE has caused multiple AP88xx device interfaces at v6.6.4 to lock.  The devices continue to ping but can not be logged onto remotely.  logging on to the device via serial connection causes the device mgt interface to restart and return to normal.

any ideas?

(CID:148770591)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-09-17

---

Dear Sean Russell,

Do you use the HTTP or HTTPS protocol on AP88xx devices?

With respect.

(CID:148770621)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-09-22

---

Dear Sean Russell,

Please tell us, were you able to solve your problem or not? I also have DCE-7.7.1 installed and I have no similar problems.

With respect.

(CID:148771878)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.