Remaining free ports on patch panel

[DCIM_Support]

Hi Team, 

one of our partners is setting up network connection in DCO. 

As you can see on the attached picture on the patch panel on U38  there is a 1 free port, however DCO say 0 remaining ports. Any idea why?

 Regards

Michael

(CID:99157280)

[DCIM_Support]

Hi Michael, I'm not sure why this is happening. I cannot seem to reproduce it myself. I would imagine that maybe the rack view is not fully updated/repainted (maybe try zooming in/out to see if that changes anything.) in the client. However it might also be that there is an issue. In order to get some more understanding it would be nice to see a screenshot from the "Network Cable Browser" view linked to the patch panel showing the error (if running DCO 7.5). If using 7.4.5 a screenshot from the "Network Management" view and the properties page of the patch panel showing the back side connection would needed. /Søren

(CID:99157317)

[DCIM_Support]

Michael Chrustowicz did you see this?

(CID:99157364)

[DCIM_Support]

Hello Michael,

Prior to finding this issue have you or anyone made any major changes to the data center configuration?

Thank You

Victor 

(CID:99157628)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.