EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-05 02:02 AM
Hi,
we have detected a problem in DCE 8.1.1 when we try to open the web browser of a UPS with NMC 4 in the private lan of DCE, it does not work. We have tried with the internal browser and the external browser and both fails. If we open the web page directly from the web browser in the some laptop where the DCE client is installed, it works perfectly. If we try to open in DCE other devices in the same private network with other NMCs v2 it works too.
The web browser starts, but when you prompt the user/pass it says that the connection with the server is lost:
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-11 01:20 PM
Hi @jzurera,
Engineering is aware of this issue. We missed adding it to DCE known issues. It is documented now.
Thanks!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-11 01:20 PM
Hi @jzurera,
Engineering is aware of this issue. We missed adding it to DCE known issues. It is documented now.
Thanks!
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.