Licenses

[DCIM_Support]

How do I find out how many of the following Licences I have use for IP devices?

I know how many I have used but don't know how many I have left.

(CID:93913332)

[DCIM_Support]

I assume you're referring to the number of licenses you have available in DCE.  If so, in DCE go to system–>server admin settings–>license keys, add up your used device pack licenses and total device pack licenses, and subtract them.  That will give you your remaining available devices pack licenses. 

If you were meant another type of license or Operations module, please specify. 

(CID:93913337)

[DCIM_Support]

please just clarify some issue I meet frequently. Which MAC address should be used to activated the licence : Private or Public because some server like enterprise has MAC adresse one Private and another one for public

(CID:102924886)

[DCIM_Support]

Dear Martin Parks

to Check the Status of your Licence details and to check the remain nodes you have left  follow

1. Open the DSE Client.
2. Enter Your Host Name and Credentials.
3. Click on   System > Server Administration Setting > License Keys..
4. Here the Open windows will tell you about your license information.

and the license window will be 

Always use the MAC address to activated the licence which is shown in following Pic..
in About StruxureWare Page like following Pics.

 and one thing make sure when ever you are registering DCE or any physical device with the Mac address it is advised that you should use "Colon" (:) and not "Hyphen" (-) as a separator. e.g

1A:XX:XX:XX:XX:XX

(CID:102924989)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.