EcoStruxure Management of APC UPS and PDU

[BeardMan]

Hi all,

We are looking to refresh our current UPS and PDU setup with more of managed based setup for remote access. I have a couple of questions I can't seem to find the answer for regarding APC Smart UPS and PDU hardware.

1. Can APC Smart UPS units be managed with configuration changes to them via  EcoStruxure like IP address, reboot, SNMP changes etc?  I know EcoStruxure can report on the health of the unit and provide alerts, but I wasn't sure if configurations could be made.

2. APC PDU (network capable) units be managed via EcoStruxure. For example restart one of the power ports to reboot a device, make configuration changes like IP or SNMP settings?

[gsterling]

Hello Matthew

EcoStruxure IT Expert does indeed have the ability to make mass configuration changes of many parameters via SNMP in many cases.

Would it be ok if we asked a sales rep to contact you to review the UPS and software capabilities you're actually looking for?

Regards

Greg Sterling

[BeardMan]

@gsterling yes that would be perfect if someone from sales could reach out to me. Feel free to contact me via a DM and I can provide my contact info.

[Bacote84]

---

@gsterling wrote:

Hello Matthew

EcoStruxure IT Expert does indeed have the ability to make mass configuration changes of many parameters via SNMP in many cases.

Would it be ok if we asked a sales rep to contact you to review the UPS and software capabilities you're actually looking for?

Regards

Greg Sterling

---

Everything is very open with a clear description of the issues. It was truly informative. Your response is very helpful. Many thanks for sharing!