EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-11-23 02:16 AM
Hi Guys,
I got a critical problem when deploy the DDF to DCE. I need seek your help and I didn’t has wisdom and knowledge to solve it.
Highlight:
The DCE’s “DH2_Rm2113_RHT5_HATemp” display value is 67’C. and Honeywell controller value should be 23.56’C which same as SBO. I discover that around 70% Bacnet point value was incorrect and has this problem also. The Modbus ID register was correct.
Please see the attachment is the AS screen capture and DDF file
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-11-23 09:03 AM
This appears to be a custom DDF. Do you know where it came from? Can you ask the person who created it?
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.