DCO Power Capacity Not Showing

[DCIM_Support]

Hi Team,

Please see below DCO Global page, what could possibly cause the power capacity not to show even after configuring the UPS power to the rPDU?

Thank you.

Regards,

Felix

(CID:105465046)

[DCIM_Support · Accepted solution]

Hi Felix,

I was wondering what the mouse-over would have displayed, perhaps the KPI's have not been updated yet. The capacity circle is daily updated. For a fresh/instant update, go to Tools > Preferences > Capacity History > "Record now" .
more info available here:Capacity history KPIs over time

Kind regards

(CID:105465248)

[DCIM_Support]

Hi Jef, Thank your for your response, I have done the 'Record now' but the power capacity doesn't show as of yet. Regards, Felix

(CID:105465434)

[DCIM_Support]

Hi Jef, Please find attached screen shots for your perusal. Regards, Felix

(CID:105467224)

[DCIM_Support]

Hi Felix, Would you mind to share a copy of the latest backup and the server logs with me. I can share my =S= box, if it's okay with you. Kind regards

(CID:105465514)

[DCIM_Support]

Hi Jef, I have already apploaded the log files. Thank you. Regards, Felix

(CID:105465524)

[DCIM_Support]

Hi Jef, After doing a backup the power capacity did show up, now everything is fine. Thank you. Regards, Felix

(CID:105465576)

[DCIM_Support]

Hi Felix, Excellent, many thanks for taking the time and sharing that it's working fine now. Kind regards

(CID:105465586)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.