DCO Installation in HP Proliant DL120 Gen9

[DCIM_Support]

HI team,

Please advice,

i would like install DCO in HP Proliant DL120 gen 9, which have 2 Boot menu (Legacy BIOS and UEFI).

When i install through Legacy BIOS, the HP SW RAID was not supported and i got failed in partition disk step.

When i installed through recommended UEFI, it only support for Windows, Redhat, SUSE and VMware.

(CID:104175258)

[DCIM_Support]

Hi Heri,

Data Center Operation does not support software raid. You can see more information about this on our server requirements page here.

So this is most likely why the installation is failing. Is it possible for you to find another server with a hardware raid?

Thanks

Jesper

(CID:104175263)

[DCIM_Support]

There are other options: 1. Install VMware ESXi and DCO on top of it. There is a free license for a standalone ESXi. 2. RHEL 6 may have the right drivers. 3. Wait for DCO 8.0 to be released. Contains newer drivers.

(CID:105466061)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.