EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-06 12:29 AM
This question was originally posted on DCIM Support by Saad Alvi on 2019-12-31
Hello Support,
We are facing problem to add device in DCE. We have 50 node license but unable to add more than 5 devices. Devices after 5 added in DCE but go to IDLE state.
Thanks & Regards,
Saad Alvi
+92-321-2018141
(CID:153093465)
Posted: 2020-07-06 12:29 AM
This answer was originally posted on DCIM Support by Justine Chester on 2019-12-31
Hi Saad,
Good day!
If you are using a DCE VM, you will need to register the passcode (AP94VMACT) and apply the license key to the DCE appliance before you can add more licenses to the DCE server.
I hope this helps.
Regards,
Justine
(CID:153093470)
Posted: 2020-07-06 12:29 AM
This answer was originally posted on DCIM Support by Saad Alvi on 2019-12-31
Hi Justine,
This is a physical server. Thank you
Regards,
Saad Alvi
(CID:153093474)
Posted: 2020-07-06 12:29 AM
This comment was originally posted on DCIM Support by spezialist on 2019-12-31
Dear Saad Alvi,
Ok, then please show a screenshot from the DCE-client About...
With respect.
(CID:153093482)
Posted: 2020-07-06 12:29 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.