DCE 7.4.0: "Alarm DCO 8.0.1 Backup is missing, but DCO has backups"

[DCIM_Support]

DCE 7.4.0: "Alarm DCO 8.0.1 Backup is missing, but DCO has backups",
                     see below, why???

Picture 1: DCE 7.4.0: "Alarm DCO 8.0.1 Backup is missing"

Picture 2: DCE 7.4.0: Used: schneiderops-8.0.1

Picture 3: DCE 7.4.0: Installed: schneiderops-8.0.1

Picture 4: DCO 8.0.1: Version

Picture 5: DCO 8.0.1: Backup Status Ok

Picture 6: DCO 8.0.1: Backup file name

Thanks in advance,

Jörgen Nilsson

(CID:110004497)

[DCIM_Support]

Hi Jorgen,

The location of your backup files, is it local to the DCO server or located on a remote/network drive?

I recall that I had registered a similar case, a sort of bug report, that we might see a falls backup notification for DCO 8.x when monitored by DCE 7.4.x. I will go ahead add your observation/description to the existing case (which is open at the moment).

Kind regards

(CID:110004556)

[DCIM_Support]

Hi Jef,

The backup files is located remotely with: Network Filesystem (nfs)

Thanks in advance,
Jörgen

(CID:110005316)

[DCIM_Support]

Trying also this way...: Hi Jef, The backup files is located remotely with: Network Filesystem (nfs) Thanks in advance, Jörgen

(CID:110004560)

[DCIM_Support]

Many thanks Jorgen, It is now added to the enhancement case. Kind regards

(CID:110004563)

[DCIM_Support]

Hi Jef, I'm also seeing exactly this issue - DCE 7.4.0 alarm for a backup failure in DCO (using latest DDF), when the backup is actually successful. It's also located remotely with NFS David

(CID:110004740)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.