EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Posted: 2020-07-03 10:21 PM
This question was originally posted on DCIM Support by Jim Davis on 2017-09-01
Hello team
I have a customer with an EGX100 taking modbus to a Cummins C28D5 generator with a PS0500 controller. It is currently monitored by a BMS and they would now like to monitor it in DCE. I cannot see an existing DDF for the generator or controller in the supported device list. Could you please advise if an existing alternative can be used or if a new one would have to be created.
Regards
Jim Davis - NIE - Melbourne/AU
(CID:124521743)
Posted: 2020-07-03 10:22 PM
This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2017-09-01
Dear Jim,
The best way to get the DDF file for your device is to submit the Modbus DDF request here.
I hope it helps.
Regards,
Bala
(CID:124521775)
Posted: 2020-07-03 10:22 PM
This comment was originally posted on DCIM Support by spezialist on 2017-09-17
Hi Jim Davis,
Have you solved this problem or not?
With respect.
(CID:125208271)
Posted: 2020-07-03 10:22 PM
This comment was originally posted on DCIM Support by Jim Davis on 2017-09-17
Not yet as waiting on customer to get back to me.
(CID:125208276)
Posted: 2020-07-03 10:22 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.