AR3200 Split Racks Supported properly?

[DCIM_Support]

When will DCO support racks like AR3200 properly? 

Having proper support for split racks would be very useful as rack U numbering is repeated in each half of the split rack.

The AR3200 has a top rack with U's 1-20 and a bottom rack also with U's numbered 1-20

Right now the AR3200 as provided in DCO has U's numbering 1-42 with no demarcation point between the upper and lower colo spaces.

(CID:94603170)

[DCIM_Support · Accepted solution]

Hi Scott,

Unfortunately this rack type is not supported in DCO.

The subject has been discussed earlier in these 2 threads:

Does DCO 7.4 support half rack, quarter rack or any other height racks?

(CID:94603207)

[DCIM_Support]

Hi Scott, It is very much in the roadmap to be supported yes. I will add you to the list of requestors. /Søren

(CID:94603342)

[DCIM_Support]

Soren, Is this on the roadmap to be supported? We invest a lot of money in these racks with Schneider and pay a significant premium for them. It would be good for Schneiders own DCIM to support there own products properly. Happy to wait, but if this is a feature request on your product development roadmap can you please put me down as a +1 Thanks, Scott

(CID:94603432)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.