Refresh Outstation with read permission

IvanDeMarco97 · ‎2024-05-27

Hi all,

is it possible to Refresh an Outstation with read permission?

Thanks!

BevanWeiss · ‎2024-05-27

Out of the box GeoSCADA. No.
Refresh is an action associated with the Retrieve Data permission.

https://tprojects.schneider-electric.com/GeoSCADAHelp/ClearSCADA%202017%20R3/Content/DriversGuide/Re...

So you should grant all users that need to perform 'Refresh' this permission

Lead Control Systems Engineer for Alliance Automation (VIC).
All opinions are my own and do not represent the opinions or policies of my employer, or of my cat..

See Answer In Context

BevanWeiss · ‎2024-05-27

Out of the box GeoSCADA. No.
Refresh is an action associated with the Retrieve Data permission.

https://tprojects.schneider-electric.com/GeoSCADAHelp/ClearSCADA%202017%20R3/Content/DriversGuide/Re...

So you should grant all users that need to perform 'Refresh' this permission

Lead Control Systems Engineer for Alliance Automation (VIC).
All opinions are my own and do not represent the opinions or policies of my employer, or of my cat..

sbeadle · ‎2024-05-28

You can, however, create a Logic program and assign Read permission to manual execution.

The ST Logic program could execute the Refresh action.

Of course, this means that almost everyone can refresh data, which might not be your intention?