EcoStruxure Geo SCADA Expert Forum
Schneider Electric support forum about installation, configuration, integration and troubleshooting of EcoStruxure Geo SCADA Expert (ClearSCADA, ViewX, WebX).
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-22 07:25 AM . Last Modified: 2023-05-02 11:46 PM
Hi recently upgraded to GeoSCADA 85.8390.1 2022 from 2019. The server end is fine with ViewX working as expected however on one of our clients when we upgraded to 2022 when we log in our mimics are displayed in table format and we use that for navigation.
The mimics cannot be loaded and appear as attachment and display error message Error loading SCX.... The specified system does not exist.
Any thoughts?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-22 07:41 AM
I resolved issue by installing older 84.8335.2 version. I do not think this is the same as the Exists() animation issue on the latest firmware?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-22 08:06 AM
Hi.
What system do the embedded mimics say they want? Right-click the embedded mimic, select properties and look at the reference - does it have a System name different from your 2022 system?
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.