Easy UPS 3-Phase Modular & Galaxy PX

Supported products EMUPS50K250PBHS, EMUPS50K250QBHS, GPXUPS100K250PBHS, GPXUPS100K250QBHS, E3MUPS100K150HINS and E3MUPS100K250HINS The Easy UPS 3-Phase Modular UPS, Galaxy PX UPS and Easy UPS 3M Advanced application firmware v2.5.2.3 release notes apply to the following NMC cards: AP9640 UPS Network Management Card 3 AP9641 UPS Network Management Card 3   Affected Revision Levels   Component  File Details Supported Products Easy UPS 3-Phase Modular application apc_hw21_emgpx-2.5.2.3.nmc3 Application for Easy UPS 3-Phase Modular UPS 50kW Scalable to 250kW (400V) EMUPS50K250PBHS and EMUPS50K250QBHS Galaxy PX application apc_hw21_emgpx-2.5.2.3.nmc3 Application for Galaxy PX UPS 100kW Scalable to 250kW GPXUPS100K250PBHS and GPXUPS100K250QBHS Easy UPS 3M Advanced application apc_hw21_emgpx-2.5.2.3.nmc3 Application for Easy UPS 3M Advanced UPS E3MUPS100K150HINS and E3MUPS100K250HINS   For details on upgrading the UPS Network Management Card 3 (NMC 3) firmware, see the NMC3 User Guide.   NOTE: The apc_hw21_emgpx-2-5-2-3.exe application is compatible with Easy UPS 3-Phase Modular UPS andGalaxy UPS and Easy UPS 3M Advanced UPS firmware version 5.2.x   New Features   New Feature Support added for Parallel function with up to 4+0 for capacity and up to 3+1 for redundancy.   Fixed Issues   Fixed Issue An issue occurring with Modbus Bulk read when including a reserved register is now fixed.   Known Issues   Known Issue Only one user can browse through the Event Log at a time. The frequency tolerances displayed on the UPS Output Measurements are incorrect. The supported output frequencies/output frequency tolerances are: 50Hz/60Hz +/- 1/3/10 Hz The values for the Frequency Tolerances field displayed on the Web UI should be ignored. Registration of Parallel UPS devices in PowerChute Network Shutdown is not supported.   Hash Signatures   Signatures apc_hw21_emgpx-2.5.2.3.nmc3 MD5 73a06b7080e9110c1c7d41308a80cba2 SHA-1 5585f26e7ac32a1785bacc9801754d79026fe380 SHA-256 5afecc6845c2443857f83f74821b740678b575e6dac855b8d906f03867ec851e

Supported products   EMUPS50K250PBHS, EMUPS50K250QBHS, GPXUPS100K250PBHS, GPXUPS100K250QBHS, E3MUPS100K150HINS and E3MUPS100K250HINS The Easy UPS 3-Phase Modular UPS, Galaxy PX UPS and Easy UPS 3M Advanced application firmware v2.5.1.1 release notes apply to the following NMC cards:   AP9640 UPS Network Management Card 3 AP9641 UPS Network Management Card 3   Affected Revision Levels   Component  File Details Supported Product Easy UPS 3-Phase Modular application apc_hw21_emgpx-2.5.1.1.nmc3 Application for Easy UPS 3-Phase Modular UPS 50kW Scalable to 250kW (400V) EMUPS50K250PBHS and EMUPS50K250QBHS Galaxy PX application apc_hw21_emgpx-2.5.1.1.nmc3 Application for Galaxy PX UPS 100kW Scalable to 250kW GPXUPS100K250PBHS and GPXUPS100K250QBHS Easy UPS 3M Advanced application apc_hw21_emgpx-2.5.1.1.nmc3 Application for Easy UPS 3M Advanced UPS E3MUPS100K150HINS and E3MUPS100K250HINS   For details on upgrading the UPS Network Management Card 3 (NMC 3) firmware, see the NMC3 User Guide.   NOTE: The apc_hw21_emgpx-2-5-1-1.nmc3 application is compatible with Easy UPS 3-Phase Modular UPS andGalaxy UPS and Easy UPS 3M Advanced UPS firmware version 3.4.x   New Features   New Feature UPS Family Easy UPS 3-PhaseModular & Galaxy PX Easy UPS 3M Advanced Support added for BACnet. ♦   Support added for Basic MIB RFC 1628. ♦   The Network Management Card application is now available in nine localized languages: French, Russian, Spanish, Italian, German, Portuguese, Chinese, Korean, and Japanese. ♦ ♦ Security Updates The default value for Bad Login Attempts is now 5. In previous firmwareversions, it was 0 (unlimited). If the number of Bad Login Attempts is exceeded, the user account willbe locked out for 1 hour, or until the Super User or other admin-level account unlocks the account. The Web UI now reports "Invalid username or password" instead of"Account locked out" if the number of Bad Login Attempts is exceeded. These security updates affect all user accounts, including the SuperUser. ♦ ♦   Fixed Issues   Fixed Issue It is now possible to configure UPS related events in PowerChute Network Shutdown.   Known Issues   Known Issue Only one user can browse through the Event Log at a time. The frequency tolerances displayed on the UPS Output Measurements are incorrect. The supported output frequencies/output frequency tolerances are: 50Hz/60Hz +/- 1/3/10 Hz The values for the Frequency Tolerances field displayed on the Web UI should be ignored. When you perform bulk read in Modbus register, it will not return the correct values 4875, 4878, 4880 and 8207.However, you can perform individual Modbus read to return the correct values.   Hash Signatures   Signatures apc_hw21_emgpx-2.5.1.1.nmc3 MD5 3556985e3b99dc4437cdb69bc59e6c7e SHA-1 656c812740f743ee301f88a8679a5179818c3483 SHA-256 bedccdf5346467cf82764f098c2fcabdb4c43a6d1ef7cf137258d64900271afd