Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
EMUPS50K250PBHS, EMUPS50K250QBHS, GPXUPS100K250PBHS, GPXUPS100K250QBHS, E3MUPS100K150HINS and E3MUPS100K250HINS
The Easy UPS 3-Phase Modular UPS, Galaxy PX UPS and Easy UPS 3M Advanced application firmware v2.5.2.3 release notes apply to the following NMC cards:
AP9640 UPS Network Management Card 3
AP9641 UPS Network Management Card 3
Affected Revision Levels
Component
File
Details
Supported Products
Easy UPS 3-Phase Modular application
apc_hw21_emgpx-2.5.2.3.nmc3
Application for Easy UPS 3-Phase Modular UPS 50kW Scalable to 250kW (400V)
EMUPS50K250PBHS and EMUPS50K250QBHS
Galaxy PX application
apc_hw21_emgpx-2.5.2.3.nmc3
Application for Galaxy PX UPS 100kW Scalable to 250kW
GPXUPS100K250PBHS and GPXUPS100K250QBHS
Easy UPS 3M Advanced application
apc_hw21_emgpx-2.5.2.3.nmc3
Application for Easy UPS 3M Advanced UPS
E3MUPS100K150HINS and E3MUPS100K250HINS
For details on upgrading the UPS Network Management Card 3 (NMC 3) firmware, see the NMC3 User Guide.
NOTE: The apc_hw21_emgpx-2-5-2-3.exe application is compatible with Easy UPS 3-Phase Modular UPS andGalaxy UPS and Easy UPS 3M Advanced UPS firmware version 5.2.x
New Features
New Feature
Support added for Parallel function with up to 4+0 for capacity and up to 3+1 for redundancy.
Fixed Issues
Fixed Issue
An issue occurring with Modbus Bulk read when including a reserved register is now fixed.
Known Issues
Known Issue
Only one user can browse through the Event Log at a time.
The frequency tolerances displayed on the UPS Output Measurements are incorrect.
The supported output frequencies/output frequency tolerances are: 50Hz/60Hz +/- 1/3/10 Hz
The values for the Frequency Tolerances field displayed on the Web UI should be ignored.
Registration of Parallel UPS devices in PowerChute Network Shutdown is not supported.