I/A Series® MN-Sxxx Controller with CO2 Sensor PDF

[mroche1]

This document provides guidance for the HC Barcol-Air MN-Sx-CO2 sensor – an extension of the TAC I/A Series® MicroNet Sensors. The TAC I/A Series® MicroNet Sensors are wall-mounted digital temperature and humidity sensors for use with TAC I/A Series® Controllers.

Table of Contents

Introduction: I/A Series® MN-Sxxx controller with CO2 sensor – 2

Model Overview – 2

Connections – 5

Features: I/A Series® MN-Sxxx controller with CO2 sensor – 5

Calibration – 5

Specifications – 6

Excerpts

“HC Barcol-Air MN-Sx-CO2 sensors are suitable for directwall, 1/4 DIN electrical box, or surface box mounting.” – Page 2

“The CO2 sensor is factory calibrated and ready for use directly after power up. The CO2 sensor is maintenance free in normal conditions due to to the build in self correcting ABC Algorithm (Automatic Baseline Correction).” – Page 5

“The MN-SXXX series sensor measures room conditions and transmits the information to the controller via the S-Link. A single sensor can be connected directly to application specific I/A Series® MicroNet controllers via low-cost, unshielded, twisted-pair cable. The connection between the sensor and controller is not polarity-sensitive.” – Page 6