Issue
VisiSat 2.1 Build 196 Service Pack 1 provides the five following corrections:
- In the ARCnet debug Excel spreadsheet, the property editor can now be run. (Defect 1633)
- Exporting points to MNView or XBuilder, now allow up to 32 characters for the name and up to 50 characters for the description. (Defect 1706)
- In StruxureWare Building Operation WorkStation, MicroNet Interfaces can no longer be exported/imported. All MicroNet engineering should be done in VisiSat first and then imported into StruxureWare. (Defect 1765)
- Newly created blank points lists can now be saved without production an error message. (Defect 1784)
- Exports to StruxureWare no longer produce Memory leaks. (Defect 1808)
Product Line
EcoStruxure Building Operation, Satchwell MicroNet
Environment
- VisiSat 2.1 build 196
StruxureWare Building Operation Version 1.4 Onwards
Cause
Correction of five known defects.
Resolution
This Service Pack should only be added to VisiSat 2.1.196
Note:
When installed, the VisiSat 2.1 Build version/build number increases to 2.1.200. (due to one of the files in 'Program Files'). VisiSat will still show as Build 2.1.196 in Control Panel - Programs - Programs and Features - Uninstall or change program.
Installing VisiSat Service Pack 1
===============================
- Shutdown VisiSat and the VisiSat-Server.
- Run "VisiSat 2.1.196 Service Pack 1.exe".
- Extract to VisiSat installation root drive. (or extract to another location and move the Satchwell folder, created when extracted to the root of the C: drive).
- To the question 'Would you like to replace the existing file',
- select 'Yes to All'
- Restart VisiSat.
Download VisiSat 2.1 Build 196 Service Pack 1.
See VisiSat version 2.1 Build 196 service pack 2 where information on VisiSat 2.1 Build 196 Service Pack 2 can be found and the service pack downloaded.