Issue
Unable to log into the JACE-603/645 hardware with I/A Series R2 Admin Tool.
Environment
JACE-603, JACE-645
Cause
The JACE 603 and JACE 645 are network controllers that can run either R2 or G3 Niagara applications when a corresponding license is installed. These new boards are based on the QNX platform and no longer use the R2 “Admin Tool” for host-level configuration.
Resolution
Use I/A Series G3 Workbench 3.6.47 or later for all host (platform) configuration of a JACE-603 or JACE-645. Refer to the Retrofit Board Niagara R2 Install and Startup Guide for details on how to commission and use with I/A Series R2. The document is included with I/A Series G3 (docRetrofitBoardR2) 3.6.47 or later.
Note: The JACE 603 and JACE 645 supports the following revisions ...
- R2 (supports 2.301.535 or higher)
- G3 (supports 3.6.47 or higher)
