Is LON tunneling possible in a Niagara G3 station with Xenta 301 controllers connected?

Notifications

Building Automation Knowledge Base

Schneider Electric Building Automation Knowledge Base is a self-service resource to answer all your questions about EcoStruxure Building suite, Andover Continuum, Satchwell, TAC…

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Previous Next

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to Building Automation Knowledge Base

882 Views

Link copied. Please paste this link to share this article on your social media post.

Trying to translate this page to your language?

Select your language from the translate dropdown in the upper right.

Translate to: English

Issue

Job site has a Niagara G3 station integrated with several Xenta 301 controllers. Can the Menta programming tool be used via LON tunneling through the station to re-program the Xenta controllers on an as-needed basis?

Environment

Niagara G3

Xenta controllers

Cause

Field request for ease of programming

Resolution

Tunneling via a Niagara G3 station to Xenta controllers is not possible. A direct-connection is required.

To The Top!

Is LON tunneling possible in a Niagara G3 station with Xenta 301 controllers connected?

Related Forums

Intelligent Devices Forum