I replaced the EPROMs and RAM in a 7700 DCU with a MIP, but now cannot do a software restore.

[Product_Support]

Issue

I replaced the EPROMs and RAM in a 7700 DCU with a MIP, but now cannot do a software restore. What is wrong?

Environment

I/NET site

Cause

I replaced the EPROMs and RAM in a 7700 DCU with a MIP, but now cannot do a software restore. What is wrong?

Resolution

Verify that the network configuration is correct in the NET. Con. Editor. The "Dn" field for the TAP or Controller must be configured with a "Y" before the Tap/Controller will appear in the software Restore Editor.