Configuring a Multical 601 meter.

Notifications

Building Automation Knowledge Base

Schneider Electric Building Automation Knowledge Base is a self-service resource to answer all your questions about EcoStruxure Building suite, Andover Continuum, Satchwell, TAC…

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Previous Next

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to Building Automation Knowledge Base

1410 Views

Link copied. Please paste this link to share this article on your social media post.

Trying to translate this page to your language?

Select your language from the translate dropdown in the upper right.

Translate to: English

Issue

What is necessary to do in order to change settings in the Kamstrup Multical 601 meter?

Environment

Kamstrup Multical 601

Cause

How to change the basic settings in pulse calculations from MWhrs to kWhrs, and also other settings.

Resolution

Metertool software (part no: MAHWSWTOOL) together with the Optical eye USB hardware (part no: MAOPTICUSB) is required for this type of configuration. For more information, please take a look at MeterTool for Multical 601 presentation.

To The Top!

Configuring a Multical 601 meter.

Related Forums

Intelligent Devices Forum