SDMO ATS connection

[Tw40]

I am trying to connect an ASCO 185 transfer switch to a SDMO model TM20CU - S2500 generator with a Mics Telys1 controller and CB12 pc board.  I cannot find any litterature on the pc board itself - how/where to connect sensing wires from the ATS.  Im assuming C24 but not positive.  Any help would be much appreciated...Pictures of the board are attached 

[Fredo]

,

Hi.

Do you check the controller? it is possible that the signal for start remote is received for the controller. Do you have some terminal block? Check the inputs of controller. may be that is the solution.

Alfredo