SRT 2200: Continuous beep (self test)

[Charlievb]

Hi,

I have an UPS SRT 2200 which had a battery replacement a few days ago.
No problems there changed the dates and did a self test an all is good.

However during one of the tests i wrongly pressed on the 'UPS Alarm Test' which tests the audible sound.
Now for some weird reason it doesn't stop anymore. I thought it might be a few hours but has been going on for more then 1 day. but no. On the display when i go to the diagnostics i can go to the UPS alarm test en see 'Abort test' but when i click 'ok' it doesn't stop. When i hold the button it stays quite but the moment i release it beeps again.

Question now is how do i stop it? And is there a way without power loss since some load on the UPS needs to be timed to shut down.

I looked in the CLI but can't find anything that helps me much except 'ups -a Start' to do this test.

Thanks for any advice