Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel

J25B/J35B EMI/RFI noise rejection frequencies and noise suppression rating

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.


J25B/J35B EMI/RFI noise rejection frequencies and noise suppression rating

This was originally posted on APC forums on 11/19/2011

does anyone know what the EMI/RFI Noise rejection frequencies are for the J25B / J35B AV Power Conditioners ? and the noise suppression rating in db ? these two VERY important specs are missing. a good unit will start at 40-60db for noise filtering. and EMI/RFI should be in the 100Khz - 10Mhz range. i can not find this information anywhere for these units.

Message was edited by: beysic