Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the Schneider Electric Community! We have moved to a new address: community.se.com — bookmark it today and contact SchneiderCommunity.Support@se.com if you have any questions!
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82697members
350420posts

How long will BR1500G last with VOIP modem

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
BillP
Administrator Administrator
Administrator
0 Likes
1
87

How long will BR1500G last with VOIP modem

This question was originally posted by randy on APC forums on 12/8/2011


Hello, I'm trying to get an estimate on how long a UPS will power a VOIP phone/internet modem.

The modem is 9 W max, usually 6-7 W nominal. and usually about a .5 amp draw.

Any ideas on how long the BR1500G would last?


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
87

Re: How long will BR1500G last with VOIP modem

This reply was originally posted by Angela on APC forums on 12/8/2011


here is the runtime chart on that unit, on the middle of the page: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BR1000G

we don't test that low unfortunately so you can at least use 50 watts as a reference and expect a bit more out of the unit. with a load that low as well, the UPS won't be too efficient.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
88

Re: How long will BR1500G last with VOIP modem

This reply was originally posted by Angela on APC forums on 12/8/2011


here is the runtime chart on that unit, on the middle of the page: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BR1000G

we don't test that low unfortunately so you can at least use 50 watts as a reference and expect a bit more out of the unit. with a load that low as well, the UPS won't be too efficient.