Symmetra Chassis plus ....

[Anonymous user]

Hi everyone,

I have 2 SYBt5 battery packs and 2 Sypm4ki Powere Modules , both from a insolvent storehouse.

I am considering to buy a SYAF16KI Chassis, but I still have some doubts.

What modules do I need more in order to get a full working SYA8K16I (8KVAs only) ??

Is SYA8K16I = SYAF16KI Chassis + 2 SYMIM5 (Int.Modules) + 2 SYPM4KI + 2 SYBT5 + 2 SYPD11 (PowerDist.Panels) ?

I think chassis includes AP9619 NetworkCard, AP9512 Tblk Probe AND Digital PowerView... What else is needed ? Cables ?

Supposing that everything is correct,

How much time (seconds) does the SYA8K16I need to get into full working mode when I send the Cold Start command from the PowerView ?

Many thanks in advance,

Rui

[Anonymous user]

Okay,

You wrote SYA8K16I does not come with receptacles.. But does the SYAF16KI chassis include those 2 (or 4) PDU's ? 

I need thePowerViewat a distance of 10 -15 meters. Is the cable a standard Ethernet CAT-5 ?

Many thanks again.

[Anonymous user · Accepted solution]

So,

In order to power up my devices I need al least *one* Power Distribution Panel .

Can I have a single SYPD8 to get a working start ?

Thx again