Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-1212:42 AM. Last Modified: 2024-01-3103:00 AM
SUVT 400Volts
Good Day,
I am trying to find out if the 30KVA VT 400volts can be used with 60hz freq? would it give out 60hz? the manual is saying it will use it on the input but not the output
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-1212:42 AM. Last Modified: 2024-01-3103:00 AM
In the PowerView-display on the UPS you can set output frequency to "Auto", then the output follows the input. Or you van force the output to 50 or 60Hz.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-1212:42 AM. Last Modified: 2024-01-3103:00 AM
In the PowerView-display on the UPS you can set output frequency to "Auto", then the output follows the input. Or you van force the output to 50 or 60Hz.