Rack PDU 7xxx command options

BillP · ‎2021-07-11

This question was originally posted by Dan on APC forums on 3/3/2020

We would like to create a web based set of events such as forcing a reboot on 7000 based ip pdu's. Rather than providing user logons and teaching users how to navigate what is a fairly easy menu we have been asked to create a central site to perform the tasks for users.

Our typ device is running rpdu v3.9.2 under AOS 3.9.2

Our 1st thought was to use a rest interface if one exists for the device as a worst case we thought of telnet and canned commands. ANy thoughts???

DAn

B-DoubleE_apc · ‎2021-07-11

This was originally posted on APC forums on 3/3/2020

Hi Dan,

There are a few ways to interface with the PDU's that might help you. Switched rPDU's have a scripting interface that can be used to push commands, more info here: https://www.apc.com/us/en/faqs/FA156163/

rPDU's also support SNMP, so a web-based solution that would use SNMP OID's to set different values could also work.

See Answer In Context

B-DoubleE_apc · ‎2021-07-11

This was originally posted on APC forums on 3/3/2020

Hi Dan,

There are a few ways to interface with the PDU's that might help you. Switched rPDU's have a scripting interface that can be used to push commands, more info here: https://www.apc.com/us/en/faqs/FA156163/

rPDU's also support SNMP, so a web-based solution that would use SNMP OID's to set different values could also work.