Ask Me About Webinar: Data Center Assets - Modeling, Cooling, and CFD Simulation Join our 30-minute expert session on July 10, 2025 (9:00 AM & 5:00 PM CET), to explore Digital Twins, cooling simulations, and IT infrastructure modeling. Learn how to boost resiliency and plan power capacity effectively.Register now to secure your spot!
Firmware Upgrade for APC Metered Rack PDU
APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-0107:01 AM. Last Modified: 2024-03-0411:08 PM
Hello,
v6.0.9 has a potential issue with it so you'll want to update to v6.1.0. If you want to do it within StruxureWare using the firmware catalog, go to StruxureWare and go to the Updates menu->apply firmware updates and verify rpdu2g v6.1.0 with AOS 6.1.3 is available. If v6.0.9 is there, then your StruxureWare firmware catalog needs to be updated and we cannot use that version as outlined here -> http://forums.apc.com/spaces/6/racks-rack-accessories-cooling/forums/general/10440/information-bulle...
For more help with doing things through StruxureWare, I'd go to dcimsupport.apc.com. I believe you may be able to just hit "check updates" on the Apply Firmware Updates page but I am not sure.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-07-0107:01 AM. Last Modified: 2024-03-0411:08 PM
Hello,
v6.0.9 has a potential issue with it so you'll want to update to v6.1.0. If you want to do it within StruxureWare using the firmware catalog, go to StruxureWare and go to the Updates menu->apply firmware updates and verify rpdu2g v6.1.0 with AOS 6.1.3 is available. If v6.0.9 is there, then your StruxureWare firmware catalog needs to be updated and we cannot use that version as outlined here -> http://forums.apc.com/spaces/6/racks-rack-accessories-cooling/forums/general/10440/information-bulle...
For more help with doing things through StruxureWare, I'd go to dcimsupport.apc.com. I believe you may be able to just hit "check updates" on the Apply Firmware Updates page but I am not sure.