- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
Enviromental Monitor High Temp Email
I am getting a ton of emails from my enviromental monitor stating "EMU: Probe 2 ST inc temperature violation 118F 73F."
There was two spikes a day ago but I am still getting emails. Is the probe going bad? The temp's have stayed at 73F for over 60 days except the two unknown spikes.
Any ideas? I don't want to turn off the emails since there might be a true issue sometime.
Regards,
J
- Tags:
- probe_problem
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions

Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
hi.. i also get this type of problem some time,but at that time i just reset my monitor and it work fine.
Link copied. Please paste this link to share this article on your social media post.

Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
Hi what model of environmental monitor are you using (?), or , is this from an APC UPS web/snmp card equipped with a probe ? Sometimes alerts can be "latching" and you need to physically reset the probe before the alerts will stop, but that usually applies to things like leak sensors.
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
I have an 9319. I "cleared" the alarms and that seemed to help. I will also update it since it has an old firmware.
Link copied. Please paste this link to share this article on your social media post.

Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-25 09:31 PM . Last Modified: 2024-03-19 04:25 AM
hi.. i also get this type of problem some time,but at that time i just reset my monitor and it work fine.
Link copied. Please paste this link to share this article on your social media post.

