Blunder of the month. ATS NMC firmware applied to UPS

[dbguk]

Currently trying to revert a slip up on a couple of NMC3 devices. 

Latest ATS NMC3 firmware has been applied to a SRT3000 UPS.

Any suggestions on how I revert to the UPS NMC3 firmware?

Caught in the auto restart, can connect via console successfully but unsure of exact files to transfer and where I can get them from.

Any help greatly appreciated

[Teken]

You may use this APC Resource Link to download the latest NMC 3 (AP9640, 41, 43) Smart-UPS firmware:

https://www.apc.com/us/en/download/document/APC_NMC3_SU_EN/

Ensure FTP is enabled, do not save logs, once the pop up appears wait another ten seconds before closing the window.

NOTE: The above link is for the none subscription firmware of SNS. If you require the SNS version you’ll need to follow the same instructions to obtain the same or contact APC Technical Support.

Questions Ask . . . 👍