Update DALI Application 20200227 - available!

[PetrMares]

Hello,

Let me inform you we have just released on marketplace updated version of DALI application.

## Bugfix

compatibility with KNX DALI gateway fw 3.xx

DALI application is now capable to handle MTN6725-0001 - KNX DALI gateway (fw 1.xx & fw 3.xx) 

- Solutions

[Omaelk]

Hey @PetrMares , can you please share a link? 

thanks 

[Thomas_Rohde]

Hi,

it is not possible to share a link because it is only available within an appstore reachable by
Wiser for KNX (LSS100100) and spaceLYnk (LSS100200). Means you need to be logged into the
device, which is connected to the internet, to be able to reach the appstore and to download
this new app version on your dedicated device.

[Omaelk]

Ok thanks @Thomas_Rohde  🙂

[PetrMares]

Update:

We did one small change in the DALI application in order to correctly show ECG nr. because from fw3.xx ETS ECG address is used.

In the version 1 of the firmware the real short address of the device is always identical to the number of the ECG in ETS. When an ECG is swapped after the New installation the short address is swapped and reprogrammed as well. Since version 3 of the firmware the short address which is automatically assigned after New Installation is always kept.

You can already download an updated version 20200304 from marketplace.

The last issue after fw upgrade is about run hours which is set in KNX DALI gateway to 1193046. When you reset hours counter in KNX DALI gateway it starts again from "0". This needs to be discussed with colleagues responsible for the product itself.

[gianmarco.nardo]

Is the application capable to handle also MTN6725-0101 devices?

BR

Gianmarco

@PetrMares