SpaceLogic KNX Forum
Schneider Electric SpaceLogic KNX forum to get support and share knowledge including selection, installation and troubleshooting for spaceLYnk, Wiser for KNX, eConfigure KNX, SpaceLogic KNX Hybrid module and other topics.
Link copied. Please paste this link to share this article on your social media post.
Dear all,
Let me inform you firmware 2.6.0 for Wiser for KNX and spaceLYnk logic controllers has been just released on Schneider Electric global website.
FW 2.6.0 has different versions supporting hw1.xx,hw2.xx and hw3.xx for Wiser for KNX and spaceLYnk covering all existing devices on the installed base.
Content of firmware zip file:
The main focus of this release is Cybersecurity supporting KNX IP secure communication and other multiple improvements that enhance the stability and security of the controllers. Similar actions have been also done in the Cloud platform in the recent months to support and improve the communication with the controllers. We recommend keeping your controllers updated for achieving the maximum security.
Besides security enhancements, the new FW includes a few other improvements, summarized below:
Newly added in firmware 2.6.0:
· KNX IP secure compatibility
· KNX DPT 245.600:6byte DALI test result
· BACnet: support for int64 object type
· BACnet configuration: BACnet device name
· Modbus: Modbus status object
You can download firmware 2.6.0 here:
Wiser for KNX: https://www.se.com/ww/en/product/LSS100100/wiser-for-knx-logic-controller/?range=62143-wiser-for-knx...
Let me thank my colleagues from the Solutions team to makethis release happen.
Link copied. Please paste this link to share this article on your social media post.
Perfect !!
Is it possible to put all application note on the LSS100100 webpage in the link... Because to find it it's hard sometimes.
What is the process for Iphone app with this version.
I have a customer where the register process of the device (with MAC adress don't work).
Is there a new application note for this ? Do we still need to send email and import the cloud lmup file ? or just the cloud soft in app store ?
Link copied. Please paste this link to share this article on your social media post.
Where ais the documentation for the "Knx IP Secure" ?
In Ets we need to put:
ETS requires a device certificate for each device with KNX Security that is created in the ETS.
This certificate contains:
- the serial number of the device
- as well as an intangible key (FDSK= FactoryDefaultSetupKey)
Without it, no way to use IP secure !
Should be great to add Application Note, because in the firmware manual, I didn't find anything about it.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.