SpaceLogic C-Bus Forum
Schneider Electric forum about the C-Bus platform to get support and share knowledge including Network Automation Controller (NAC), Application Controller (AC) at selection, installation and troubleshooting sides.
Link copied. Please paste this link to share this article on your social media post.
Just wondering if anyone has successfuly been able to control DMX lights over Art-Net from the Nac/Shack.
Multiple universes would be great even 1 would be useful.
I know DMX can be controlled via C-Bus to DMX gateways.
This has a few limitations the number of groups/adresses that can be controlled per unit.
Addtional hardware ,space and cable runs are required.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Hi Digby
There is a module supporting Enttec Splay devices,
I have attached the Document that best describes this modules capability.
Reading the forum link you posted it was not clear how far you need to take this integration, but the post took it that a solution, with bi-directional capabilities required a server of types.
It depends on the scale of what you need as to determine the best solution, We still have the 5500DMX for C-bus
5500DMX - DMX One Way Gateway, C-Bus Control and Management System, DIN Rail Mount, 4M Modules, 300m...
which is one C-Bus to DMX, as you mentioned limited channels but very suitable for smaller application of this need when it comes to cost , time / effort
We have C-Bus Architectual Dimmers that can be controlled by C-Bus or DMX where you want C-Bus Lighting with override control from DMX station as required.
Else we have Modules like the one attached, Using third party devices as the main Server for the full service solution,
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.