How do required by Schneider dual SGR Sensors & MDGF module work with Micrologic 6.0, Masterpact NW, 6-pole, Y-Frame (wide frame)?

[STOF]

This configuration is never shown in Schneider bulletins NHA92405, 48049-182-03 or 0972DB2101, but dual SGR sensors is required in catalog 0613DB1607 09/2016. 

To complete the question, there is an FAQ on Schneider website explaining the system for W-Frame (standard frame) Masterpact with one SGR current sensor but It's impossible to find what would be the configuration and functionning with dual SGR sensors for a Masterpact, 6-Pole, Y-Frame (wide frame)

https://www.se.com/nz/en/faqs/FAQ000209118/ 

[STOF · Accepted solution]

To complete the question, there is an FAQ on Schneider website explaining the system for W-Frame (standard frame) Masterpact with one SGR current sensor but It's impossible to find what would be the configuration and functionning with dual SGR sensors for a Masterpact, 6-Pole, Y-Frame (wide frame)

https://www.se.com/nz/en/faqs/FAQ000209118/