Ecodial PV Photovoltaic Source

[GranziTeam]

How can I add in ecodial a power source from PV system?

[Genghiz]

Hello Granzi

Thanks for your interest in Ecodial.

The power source configuration form the PV source is not available in Ecodial.

----------------------------------------------------------------------------------------------------------------
This should be realized with various operating scenarios like “supplying in parallel to the utility” and “supplying only the specific part of the network” and so on.
There should be a specific calculation applied for the short circuit current from the ‘PV system’ and accordingly the protection selection.
----------------------------------------------------------------------------------------------------------------

As said; Sorry for the non-availability of such a functionality and calculations at the Ecodial.

Thanks & regards,
Team – Ecodial Expert Support.

[gurguiatu]

Hello,

Does anyone succeed to realize a diagram with ON-GRID PV System?

Thanks in advance!

[Genghiz]

Hello,

Thanks for your interest in EcoStruxure Power Design Forum.

Basic ON-Grid with Net-metering SLD is given below.

On-Grid PV SLD

• In net-metering, the excess solar energy is exported to the grid.
• The same excess solar energy exported is deducted from the energy imported from the grid subject to certain conditions.
• The consumer pays for the net-energy imported from the grid.

Thank you,
Team – Ecodial Expert Support.

[Genghiz · Accepted solution]

Hello,

Here, we have enclosed one more example SLD received from the SOLAR TECHNICAL SUPPORT.

Typical 1MW ON Grid PV System SLD

If you need further information; then we should get consulted from them.

However, please free to come back.

Thanks & Regards,

Team – Ecodial Expert Support

[gurguiatu]

Hello,

Thanks for the information.

Practically I do not know how to draw in Ecodial.

Can you provide an example?

Best regards,

Gelu Gurguiatu

[Genghiz]

Hello Gelu Gurguiatu,

Thanks for your interest in Ecodial.

The power source configuration form the PV source is not available in Ecodial.

Sorry for the non-availability of such a functionality at the Ecodial.

We will propose this as an improvement request to the product development.

Regards,
Team – Ecodial Expert Support.