How to setting Lexium 32 with iron core linear motors?

[AndrzejL]

I have attached an application note describing the connection of Lexium 32M with a linear motor.
I have a similar linear motor from another company, UNIMOTION.
My configuration is LXM32MD18M2 + SinCos VW3M3403 analogue.
In the linear motor I have a magnetic feedback system, 2mm pitch, 1V pk-pk SinCos.
Please send the project (*.psx) to SoMove for the application as attached or help in configuring LXM32M. This will be very helpful to me in setting up the connection to my linear motor.
BTW
Below is a link to a video of my linear motor controlled by a Mitsubishi MR-J5 servo drive with the BiSS-C encoder protocol.
https://lnkd.in/dWgWCK3F
Is it possible to control the same with Lexium32M + digital VW3M3402?
I see in the documentation that this card has a BiSS-B version.

[woerk]

Hello,

See details in the Lxm32M userguide.( https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=0198441113767_14.pd...)

In addition in the LXM32M ANA, DIG And RSR Encoder Modules User Guide chapter”General Settings commissioning” and  “Settings for Encoders of Third-Party Motors”available on (https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=0198441113818_LXM32...)

You have to set the 3^rd party settings with Somove.First please set first the Encoder settings in the parameter group “Encoder Ana”

Details how set the 3^rd party motor data and commissioning via   Somove see details  in the DTM Lxm32 Online help chapter “Third party motors”.

3^rd party linear motors are only possible with analog signal SinCos 1Vpp.Biss with digital encoder module  is only possible for machine encoder. See details in the in the LXM32M ANA, DIG And RSR Encoder Modules User Guide page 10.

For further support please contact the local help desk.