How do I update from PacDrive3 LMC Pro (LMC300/400/600) to LMC Pro2 Controller (LMC402/802)?

[LeTomas]

Dear @Anonymous user ,

The application project from LMC Pro controller can be used for LMC Pro 2 Controller as well.

Please see the following instruction for updating from LMC300/400/LMC600 to LMC402/LMC802 in cases you do not have to consider retain data stored on the controller. See this information in the attached  pdf named: “Replacing PacDrive LMC Pro by Pro2”.

If you need to transfer retain data to your new LMC402/LMC802 device please follow enclosed instruction with some additional steps. See this information in the attached pdf named: “Replacing PacDrive LMC Pro by Pro2 - Considering retain” .

Let us knwo if you need any further information.

Best regards,

Leandro

[SantiagoPavia]

There is nothing to do, they are fully compatible both at the hardware and software level

[Anonymous user · Accepted solution]

Hi @Anonymous user 

With the PacDrive 3 LMC Eco and Pro 2 series controllers, EcoStruxure Machine offers a scalable hardware platform for complete automation solutions, including a logic and motion/ robotics component.

[Anonymous user]

Thanks to you all for your valuable support

regards,