Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Control Panel window with Machine Expert Twin
Machine and Motion Control Forum
Support forum for Machine and Motion Control solutions, including Lexium MC12 and robotics, PacDrive, Modicon PLCs and I/Os, EcoStruxure Machine Expert Twin, … - from design, implementation to troubleshooting and more, by Schneider Electric
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hello MikeIT, the control panel provides many functions already today. It allows you to insert controls for communicating with a PLC. By right clicking on an empty square of the control panel, you will open a menu, from which you can choose different types of controls.
When you add an element to the control panel and select it, you can see its properties in the ‘Properties’ window. You will also be able to change its name and color here as well as changing different other values for the control.
If you right-click on a ‘controls’ tab of the control panel you will see a menu allowing you to make changes to the tab:
RIGHT: Allows you to move the controls tab right to change the order of the tabs.
NEW CONTROL PANEL: Create a new control panel
DELETE (Tab name): Delete the tab with the corresponding name
DELETE ALL: Delete every controls tab
UNDOCK: Move the controls tab around to another position
ALIGNMENT: Choose where in the control panel the controls tabs are situated
Nevertheless, we highly value your request and have forwarded it as improvement suggestion to our development team. Thanks a lot.
Link copied. Please paste this link to share this article on your social media post.
Hello MikeIT, the control panel provides many functions already today. It allows you to insert controls for communicating with a PLC. By right clicking on an empty square of the control panel, you will open a menu, from which you can choose different types of controls.
When you add an element to the control panel and select it, you can see its properties in the ‘Properties’ window. You will also be able to change its name and color here as well as changing different other values for the control.
If you right-click on a ‘controls’ tab of the control panel you will see a menu allowing you to make changes to the tab:
RIGHT: Allows you to move the controls tab right to change the order of the tabs.
NEW CONTROL PANEL: Create a new control panel
DELETE (Tab name): Delete the tab with the corresponding name
DELETE ALL: Delete every controls tab
UNDOCK: Move the controls tab around to another position
ALIGNMENT: Choose where in the control panel the controls tabs are situated
Nevertheless, we highly value your request and have forwarded it as improvement suggestion to our development team. Thanks a lot.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.