Automation Server BBMD

Notifications

Machine and Motion Control Forum

Support forum for Machine and Motion Control solutions, including Lexium MC12 and robotics, PacDrive, Modicon PLCs and I/Os, EcoStruxure Machine Expert Twin, … - from design, implementation to troubleshooting and more, by Schneider Electric

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Top Experts

User

Count

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Back to Machine and Motion Control Forum

270

Link copied. Please paste this link to share this article on your social media post.

We have a site with an Automation Server at one location, serving as a BBMD for two MP-C-15s at two other locations. I have very little experience dealing with BBMDs and am not certain we have it configured correctly. Both controllers are configured as a foreign device, pointed towards the IP address of the AS (10.3.6.19). We have a single BBMD entry point created under the IP network of the AS BACnet interface, with an IP of the AS (10.3.6.19). At times, both controllers remain online without issue. However, every few weeks one controller or the other goes offline and it seems the only way to get them back online is to modify the IP address of the entry point and return it back to 10.3.6.19. Any help would be much appreciated.

Replies 0

never-displayed

You must be signed in to add attachments

never-displayed

To The Top!

Automation Server BBMD

Automation Server BBMD

This is a heading