Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel

Radar Tracking Velocity - Impact

Level and Pressure Instrumentation Forum

A forum dedicated to sharing information, tips and tricks or ask/answer questions regarding radar, buoyancy, d/p level and flow, differential/absolute and gauge pressure and more! Please post tips and tricks, ask questions of the community and share new information.

Schneider Alumni (Retired)
Schneider Alumni (Retired)

Radar Tracking Velocity - Impact

Tracking Velocity DTM.PNGIf you start up a radar for a demonstration or process purposes and it seems to be changing level or updating slowly, consider adjusting is the "TRACKING VELOCITY."  You'll find photos attached to this message referring back to some of the various Master Instructions and the DTM.  Normally when we demonstrate a radar in a meeting, it may be passed around the room and "shot" at various objects for anticipated quick results...the radars can certainly do that, but the TRACKING VELOCITY may need to be turned up so it adjusts quicker.  Most (not all) process level applications are relatively slow-moving so out of the box, the TRACKING VELOCITY is set to a medium range.  Dual posted on SE Yammer Radar Yammer site.