Link copied. Please paste this link to share this article on your social media post.
1 month ago
Control Expert 14.1/ Vijeo 6.2 22.23 SP11
New to programming PLCs, how do I configure the software to run simulation of CE and Vijeo with communication between them. The software was written by others, picking up the reins, trying to understand operation. The following error is displayed on Vijeo - Failed to open connection to PLC!
I've tried to modify IP address to match CE, default 127.0.0.1, but software fails to compile.
Both programs compile and run, the hardware is currently not available.