AxisState: 0 (Not configured) for M221 in Machine Expert Basic

[FlorinG]

Hello,

I get constantly the AxisState: 0 (Not configured) and this is not what I expect. What is the cause of this state? MC_Power_PTO0 does not change the output, despite setting all the inputs at 1, in simulation mode.

What am I not doing?

Thank you,

Florin.

[LeTomas · Accepted solution]

Hi @FlorinG , 

Someone asked me the same in my channel, and i believe the problem is that you are using the PTO blocks in simulation and that is not possible, Please use a real M221 to try your code.

Best regards,

[FlorinG]

Yes, it was me who asked you. Thank you.