Supported Interface and Protocol Versions

[Anonymous user]

📖 Home  Back  

Geo SCADA Expert supports a number of interfaces and protocols for transporting data into and out of the database depending on the needs of the user and the requirements of the software involved. The following tables lists the interfaces available and the versions supported. Where the Version Support is blank, this indicates support in all released versions of the software.

Protocol / Interface	Protocol Version Support	Geo SCADA Expert Version Support	Direction	External Accreditation
ABB TotalFlow	6400 6700 XSeries	2015 R1+	Client Driver
DF1	Generic PLC2 PLC3 PLC5 PLC5/250 SLC500		Client Driver
Ethernet/IP	Micro800 CompactLogix ControlLogixMicro800 CompactLogix ControlLogix	2020+	Client Driver
DNP3	Level 4		Client Driver and Server
--> DNP3 Secure Authentication	V2		Client Driver and Server
--> DNP3-WITS	V1.1 V1.3	All Supported Versions 2013 R2+	Client Driver	WITS Protocol Committee
--> DNP3 SCADAPack E RTU/rPAC	SP300E RTU SP500E rPAC Firmware v8.12.1 Firmware v8.12.2	All Supported Versions 2013 R2+ 2015 R1+ 2015 R2+	Client Driver
--> DNP3 SCADAPack x70	574/575 470/474 470i/474i (3.0.x)                (3.1.x)	2017 R3+ 2022 2023 Release 2023 R1 (TBA)
EcoStruxure Web Services (Schneider Electric)
--> Simple Driver		2010 R3+	Server and Client
--> Advanced Driver		2013 R2+	Server and Client
Emerson FloBoss	104 107	2015 R1+	Client Driver
Emerson ROCPlus	ROC809 ROC827	2015 R1+	Client Driver
IEC 60870-5 (101 and 104)			Client Driver and Server
--> IEC 60870-5 KEMA			Client Driver	KEMA Certification (Master balanced) and KEMA Certification (Master)
--> IEC 60870-5 PHOENIX			Client Driver
Kingfisher RTU			Client Driver
IEC 61850		2021 (From February 2022 Update)	Server	IEC 61850 Capability Documents. See the four documents below.
Modbus			Client Driver and Server
--> SCADAPack Modbus			Client Driver
--> SCADAPack Realflo	Realflo 7.10	2007 R1+ 2014 R1.1+	Client Driver
--> Lufkin SAMS RPC		2013 R1+	Client Driver
--> Schneider Electric RPC	1.1	2013 R1+	Client Driver
MQTT	JSON 'A'	2019+	Client Driver
MQTT	Sparkplug (B) v2 Sparkplug v3	2022 2023 R2 (TBA)	Client Driver
MQTT	Text/JSON	2023	Client Driver
.NET API	Framework 4		Server
OPC-AE	1.1		Server (ViewX can be a client)	OPC Foundation
OPC-DA	2.05a		Server and Client	OPC Foundation
OPC-HDA	1.20		Server	OPC Foundation
OPC-UA Client		2021	Client	OPC Foundation
OPC-UA Server		2022	Server (Data Access)
OPC-XML-DA	1 and 2		Server and Client
POP3	Unencrypted TLS 1.0, 1.1 and 1.2		Client
SCADAPack 50 Data Logger		2013 R2+	Client Driver
Siemens PLC	S7-200 S7-300 S7-400		Client Driver
SMTP	Unencrypted, TLS 1.0, 1.1 and 1.2		Client (sender)
SNMP	1 2 and 3	All Supported Versions 2013 R2+	Client
SOAP			Server
Sofrel	See product Help	2017+	Client Driver	Approved by Sofrel LaCroix
Telocator Alphanumeric Protocol (TAP)	1.8		Sending Device
T-Box RTU		2013 R2+	Client Driver
Trio Radio Diagnostics			Client
Wonderware eDNA Historian		2015 R2+	Server
Wonderware Historian (On-premise and Online)		2015 R1+	Server
AVEVA PI and AVEVA Data Hub		2023	Server
ODBC SQL	SQL-92 syntax sub/superset		Server
ODBC SQL	SQL-92 syntax sub/superset		Client
OLEDB SQL	SQL-92 syntax sub/superset		Server

As new versions of software are available the number of interfaces and protocols will increase and the versions supported will change.

Go: Home Back