ClearSCADA 2009 R1.4 Upgrade Strategy

Notifications

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Important Note

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

507

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 09, 2021 07:46 PM

📖 Home Back
This document outlines the recommended strategies for upgrading to ClearSCADA 2009 R1.4.

For details on version compatibility of clients and servers as well as server-server for redundancy, please refer to the ClearSCADA Version Compatibility Matrix (2005R0 - 2010R1).

ClearSCADA 2009 R1/R1.1/R1.2/R1.3 Standalone Server

Shut the server down.

Upgrade the server to ClearSCADA 2009 R1.4.

Restart the server.

ClearSCADA 2009 R1/R1.1/R1.2/R1.3 Main and Standby Servers

Shut the standby server down.

Upgrade the standby server to ClearSCADA 2009 R1.4.

Restart the standby server.

Wait for the server to fully synchronize with the main server and go into the standby state.

Shut the main server down. The upgraded standby server will take over as the main server.

Upgrade the previously main server to ClearSCADA 2009 R1.4.

Restart the previously main server. The server will synchronize with the new main server and go into the standby state.
To take advantage of the numerous improvements in this version, it is strongly recommended that both the servers and clients be upgraded to ClearSCADA 2009 R1.4. See the Release Notes for more information.

Other Versions

To upgrade from a version older than ClearSCADA 2009 R1, please refer to the Upgrade Strategy for ClearSCADA 2009 R1 (using 2009 R1.4 instead of 2009 R1).

Go: Home Back