EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-04-11 12:10 PM
Hello All,
I'm trying to figure out why one of our APC units:
Model: AP4453
Is showing :
On our EcoStruxure IT Gateway , the APC is responding to pings.
Thanks in advance for your Help!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-05-01 03:15 PM
Hi @Batteryman24,
The values displayed within ITE are values that are being polled from the device via SNMP.
The AP44xx series Rack ATSs support out-of-phase switching, for which additional details can be found here: https://download.schneider-electric.com/files?p_Doc_Ref=SPD_BSTY-AQSJFY_EN&p_enDocType=Brochure&p_Fi...
If you have specific questions on the operation of the unit you can reach out to ATS technical support.
Kind Regards,
Cory
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-05-01 03:15 PM
Hi @Batteryman24,
The values displayed within ITE are values that are being polled from the device via SNMP.
The AP44xx series Rack ATSs support out-of-phase switching, for which additional details can be found here: https://download.schneider-electric.com/files?p_Doc_Ref=SPD_BSTY-AQSJFY_EN&p_enDocType=Brochure&p_Fi...
If you have specific questions on the operation of the unit you can reach out to ATS technical support.
Kind Regards,
Cory
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.