EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-11 01:19 AM
Hi everyone,
I am looking to connect an Ortea Sirius to DCE via it's ethernet port.
I need to find out the default network settings for the Ortea so I can log onto it's web page and change them.
Might anyone have this information?
Thank you.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-11 03:46 AM
Hello @natashagondi,
It seems that there may be 2 related documents on the Ortea Next website that may help with how to configure this device. If further guidance is needed with how to set up the device, you may need to contact Ortea Next for assistance.
https://www.orteanext.com/download/manuals/
From scanning the manuals it does not appear that SIRIUS devices have a web interface, but it does appear that they are capable of having Modbus TCP configured. There is nothing in the two related manuals that I found around web access, just configuration via a local screen.
Kind Regards,
Cory
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2024-07-11 05:22 AM
Thank you!
I happen to have an older version without the touch screen but the network settings should be in a similar location.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.